Written By: S.E. Smith
Edited By: O. Wallace

A corrosion inhibitor is a chemical compound which is designed to protect a metal or alloy from corrosion. While corrosion inhibitors will not halt or completely prevent corrosion, they can reduce the rate at which corrosion occurs, and block early corrosion damage. A wide variety of chemicals can be used for this purpose, although many are toxic, and must therefore be used with care to protect the environment.

One form of corrosion inhibitor is a compound added to a fluid such as a fuel or lubricant. In this case, the corrosion inhibitor travels with the fluid, providing protection to the systems the fluid moves through. Commonly, it forms a thin film which prevents reactions between compounds in the fluid and systems such as pipes. This type of corrosion inhibitor may be blended into the fluid continuously, or added periodically to maintain a protective film.

Corrosion inhibitors can also be sprayed or painted on to create a thin layer which will provide protection from corrosion. Many people do this on a regular basis when they oil locks and hinges to prevent them from rusting and to keep them moving smoothly. The thin layer of oil acts as a corrosion inhibitor to prevent oxidation, so that rusting cannot occur. In order to work effectively, the surface needs to be clean when the chemical is applied, as otherwise corrosive reactions can take place underneath the corrosion inhibitor.

The choice of which corrosion inhibitor to use varies, depending on the application. Different chemicals can resist different types of corrosives, and may be more suitable for various applications, depending on which corrosives and metals are involved. It is also important to consider issues such as the safety of the system when selecting a product. Some products are highly effective, but very dangerous, and the safety risks may not be worth the high level of protection conferred by the toxic compound in a system which could release pollutants into the environment.

Source:

http://www.wisegeek.com

This entry was posted on December 6, 2011 at 11:39. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Posted in Corrosion Engineering by Ali Bedran No Comments Yet